GBC ACCESSORY Suppressor MINI Centerfire Modular Over-Barrel 38mm

GBC ACCESSORY Suppressor MINI Centerfire Modular Over-Barrel 38mm

This GBC ACCESSORY Suppressor, is used for smaller sized centerfire rifles calibers, it's Modular, it's Over-Barrel and it's only 38mm in diameter.

Our suppressors are manufactured in New Zealand using the highest grade specification aluminum available, all imported from overseas.

This suppressor is one of the most effective sound reduction units around.

With it's concave front plate and fluted rear outer tube angling down to the barrel, it's also looks aesthetically pleasing to the eye.

The smaller outside diameter tubing of this GBC Suppressor, makes it more proportionality correct in conjunction with the size of the rifle.

This STANDARD Centerfire Over-Barrel Modular Suppressor configuration has 4 baffle modules making it perfect for any caliber up to 6.5mm.

With many hours of research put into designing the baffles, they are extremely effective in sound reduction for the size and weight.

The barrel isolate tube, which fits inside the modular over-barrel outer tube of the suppressor, will accept barrels up to 22mm (7/8") in diameter.

If you are using magnum calibers, it is strongly recommended that a stainless steel baffle be use as the primary baffle to give longevity to the suppressor.

All Over-barrel Suppressors come with a nylon barrel bush that needs to be individually fitted to each rifle barrel for optimum performance.

This Suppressor is ideal for the following calibers:

• 204 Ruger
• 22 Hornet, 222 Rem, 223 Rem, 22-50 Rem
• 243 Win, 6mm Rem
• 25-06 Win, 6.5 Grendel, 6.5 Creedmoor, 260 Rem, 6.5x55 Swedish

If your rifle caliber is not listed or you are unsure which suppressor is right for you, please contact us directly before you purchase.

Additional Standard Module Baffles:

• These can be purchased at check out and are used to improve sound reduction making for a quieter suppressor
• They add 21 grams in weight to the Suppressor.
• Adds 17mm to the total length of the suppressor.

Stainless Steel Module Baffles:

• These basically act as a blast shield baffle to an existing modular suppressor.
• They are fitted as the first baffle, being ideally suited for short barrel and magnum calibers rifles.
• Also used with normal caliber rifles, as they will extend the life of the suppressor.
• They add 60 grams in weight to the suppressor.
• Adds 17mm to the total length of the suppressor

Use Drop-Box for Thread Size.

• 1/2-20 UNF
• 1/2-28 UNEF
• 5/8-24 UNEF
• 14x1mm
• Special Thread (on request)

All S-MAX Suppressors have a Life Time Warranty. (Excluding bullet strikes and normal wear & tear)

Mail Order Form required to purchase this product.

Download Form from Above